- Available as 20 and 25kW
- High external static pressure up to 200Pa facilitates extensive duct and grille network
- Possibility to change ESP via wired remote control allows optimisation of the supply air volume
- Replace existing systems with R-32 technology without needing to replace the piping
- Discretely concealed in the ceiling: only the suction and discharge grilles are visible
- Guarantees operation in heating mode down to -15°C
- Reduced energy consumption thanks to specially developed DC fan motor
- Standard night quiet mode
- Maximum piping length up to 100m
- Wide range of connectable indoor units
- No optional adapter needed for DIII-connection, link your unit into the wider building management system.
- Flexible installation, as the air suction direction can be altered from rear to bottom suction
- Maximum installation height difference up to 30m
- Standard built-in drain pump with 625mm lift increases flexibility and installation speed
Home leave operation
Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
Auto cooling-heating changeover
Automatically selects heating or cooling mode to achieve the set temperature.
Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
The unit can be used as fan, blowing air without heating or cooling.
Fan speed steps (3 steps)
Allows to select up to the given number of fan speed.
Allows humidity levels to be reduced without variations in room temperature.
Removes airborne dust particles to ensure a steady supply of clean air.
Can be set to start heating or cooling anytime on a daily or weekly basis.
Wired remote control
Starts, stops and regulates the air conditioner.
Starts, stops and regulates several air conditioners from one central point.
The unit restarts automatically at the original settings after power failure.
Simplifies maintenance by indicating system faults or operating anomalies.
Drain pump kit (standard)
Facilitates condensation draining from the indoor unit.
Twin/triple/double twin application
2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.
Sorry, we could not find any documents in this category.